-
PCL 3/8" Drive Pneumatic Ratchet
Forward and reverse knob on the ratchet head.Ball type retainer with easy forward/reverse shift.Maximum Torque 60 Nm at 90 PSI,Air Consumption 115 l/min, Sound 90.0 db (A), Vibration 5.2m/s², Weight 1.2 kg.
ALT2
-
PCL 1/2" Drive Pneumatic Impact Wrench - 540 Nm
General purpose impact wrench with forward and reverse mode.Pin clutch hammer mechanism with 4 forward operation impact settings, non-slip comfort grip.Air Consumption: 300 l/min, Maximum Torque: 540 Nm at 90 PSI, Sound: 96.6 db (A), Vibration: 1.39 m/s², Weight: 2.0 kg.
ALT1
-
FUCHS 'Silkair VG22' Air Line Oil
General purpose.Lubricates pneumatic tools and equipment.Readily separates from water.
VC191
-
PCL 10 mm (3/8") Pneumatic Reversible Drill
Ideal for drilling, reaming and honing. Side mounted forward/reverse shift, fitted with 10 mm (3/8”) keyless chuck. Free speed 1,800 RPM, Air Consumption 130 l/min, Sound 87 db (A), Vibration 1.5 m/s², Weight 1.1 kg.
ALT3
-
PCL Pneumatic Orbital Sander
Ergonomic design, built in speed regulator and pad suitable for 150 mm hook and loop sanding discs. Extraction hose and dust bag included. Random orbit for a swirl-free finish. Free speed 1,200 RPM, Air Consumption 120 l/min, Sound 86.8 db (A), Vibration 4.68m/s², Weight 1.455 kg.
ALT5
-
PCL Pneumatic Die Grinder
Ideal for tyre buffing, polishing and grinding.Medium motor with high velocity and low vibration,safety throttle lever with 6 mm collet (3 piece design).Free speed 22,000 RPM, Air Consumption 115 l/min, Sound 93 db (A), Vibration 5.4 m/s², Weight 0.6 kg.
ALT4
-
PRESSOL Air Operated Grease Gun
Complete with extension pipe and 4-jaw hydraulic connector.Takes 400g cartridge or bulk feed.
TL920
-
PCL 1/4" Drive 'Mini' Pneumatic Ratchet - 27.5 Nm
"Palm Ratchet allows the operator to reach small areas. Compact and lightweight design allows maximum operator control and performace. Rear exhaust to keep airflow away from work area. High power motor for consistent performance. Maximum Torque 27.5 Nm, Weight 0.3 kg."
ALT6
-
PCL 3/8" Drive 'Mini' Pneumatic Ratchet - 27.5 Nm
Palm Ratchet allows the operator to reach small areas. Compact and lightweight design allows maximum operator control and performance. Rear exhaust to keep airflow away from work area. High power motor for consistent performance. Maximum Torque 27.5 Nm, Weight 0.4 kg.
ALT7
-
PCL 'Mini' Pneumatic Die Grinder
Allows the operator to reach into very small areas. Safety lever prevents any possible accidents. Rear exhaust to keep airflow away from the hand. High power motor designed for all tight grinding situations. 6 mm collet (3 piece design). Free speed 25,000 RPM, Weight 0.34 kg.
ALT8
-
PCL 'Mini' Pneumatic Orbital Sander
Complete with small 50 mm (2") sanding pad allows the operator to reach small areas. Random orbit allows maximum operator control and finish. Rear exhaust to keep airflow away from the hand. High power motor designed for efficient sanding.
ALT9
-
OETIKER O-Clip Hand Installation Pincers with Side Jaw
High quality design compound action pincer with side jaw. Length: 225 mm. Opening Gap: 16.5mm. Jaw Width: 8 mm
TL9240
