Search results for 'aiab.top[Tips for fast website index submission'
-
ALTA Foam Pressure Sprayer
Contains FPM VITON® (FKM) seals. Supplied with 3 x interchangeable nozzles to adjust the foam thickness. Suitable for use with S·A·S Snow Foam (Part No. SAS2017.
CAN28
-
Hand Operated Oil Suction Pump
Ideal for extracting or changing engine oils or lubricants in plant, vehicles, motorbikes, etc. As well as non lubricants such as water from tanks Supplied with 3 extension tubes.
CAN30
-
Steel Jerry Can
Conforms with UN Certification and UK HSE regulations. Manufactured from 0.8 mm steel. Safety pin included.
CAN305, CAN310, CAN320 ...
-
-
Lever Operated Barrel Pump
Fits 50 to 205 litre drums supplied with a 2" bsp - plus Tri-sure adaptor.
CAN50
-
PRESSOL Industrial Trigger Sprayer - 500 ml
Container: HDPE (high density polyethylene).
CAN55, CAN56
-
-
Motor Run Capacitor - Spade Connectors
EN 60252-1 VDE approved. RoHS. Plastic case with 6.3 x 0.8 mm fast-on terminals (6.4 mm spade connectors) to PN-EN6120. M8 x 10 mm thread complete with M8 serrated nut.
CPR14, CPR16, CPR20 ...
-
BAILCAST 'Maxiboot' Universal CV Boot Kit
Complete with 2 x stainless steel clamps, 60g sachet of MoS2 CV grease and instructions.
CVB88
-
ABRACS Blacksmith Drills
Suitable for steel, cast iron, non ferrous materials.
DAB14, DAB14.5, DAB15 ...
-
ABRACS HSS Co-Cobalt (M35) Drills - Metric
5% cobalt for longer life. Manufactured with a split point allowing the bit to instantly grip the material resulting in higher precision, accuracy and increased drilling speeds.
DAC1, DAC1.5, DAC2 ...
-
ABRACS HSS Roll Forged Drills - Metric
For use on common steel material applications and plastic. 118° tip angle improves heat removal and ensures precise pilot drilling.
DAM1, DAM1.5, DAM2 ...
-
ABRACS HSS Roll Forged Drill Set - Metric
For use on common steel material applications and plastic. 118° tip angle improves heat removal and ensures precise pilot drilling.
DAMK1
-
ABRACS HSS Roll Forged Drill Set - Metric
For use on common steel material applications and plastic. 118° tip angle improves heat removal and ensures precise pilot drilling.
DAMK2
-
ABRACS HSS Roll Forged Drills - Imperial
For use on common steel material applications and plastic. 118° tip angle improves heat removal and ensures precise pilot drilling.
DAP14, DAP14X, DAP18 ...
-
ABRACS Tungsten Carbide Burr - Cylindrical Ball Nose
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR10, DAR11, DAR2 ...
-
ABRACS Tungsten Carbide Burr - Ball Nose Cone
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR14
-
ABRACS Tungsten Carbide Burr - Pointed Tree
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR16, DAR17, DAR3
-
ABRACS Tungsten Carbide Burr - Ball Nose Tree
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR19, DAR20, DAR5 ...
-
ABRACS Tungsten Carbide Burr - Ball Nose Tree
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR21
-
ABRACS Tungsten Carbide Burr - Cylindrical No End Cut
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR25
-
ABRACS Tungsten Carbide Burr - Ball
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR26
-
ABRACS Tungsten Carbide Burr - Flame
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR27, DAR28, DAR29
-
ABRACS Tungsten Carbide Burr - Cylindrical with End Cut
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR7, DAR1, DAR9
-
ABRACS Tungsten Carbide Burr - Cylindrical with End Cut
Suitable for use on a variety of materials such as steels, alloys and cast iron.
DAR9
-
ABRACS Tungsten Carbide Burr Kit
The kit comes with a range of head shapes, all with 6mm spindle. Suitable for use on a variety of hard materials such as steels, alloys and cast iron.
DARK1
-
ALPEN Rotary Burr Cylindrical, Front End Cut
Tungsten carbide.No. 6 Cut (Universal).For soft and hard metals (weld seams).Supplied in a plastic storage box.
DB1, DB7, DB8 ...
-
ALPEN Rotary Burr Ball Nose
Tungsten carbide.No. 6 Cut (Universal).For soft and hard metals (weld seams).Supplied in a plastic storage box.
DB2, DB10, DB11 ...
-
ALPEN Rotary Burr Arc Pointed Nose (Tree)
Tungsten carbide.No. 6 Cut (Universal).For soft and hard metals (weld seams).Supplied in a plastic storage box.
DB3, DB16, DB17 ...
-
ALPEN Rotary Burr Oval
Tungsten carbide.No. 6 Cut (Universal).For soft and hard metals (weld seams).Supplied in a plastic storage box.
DB4, DB22, DB23 ...
