Search results for 'aiab.top[The way to be indexed quickly by search engines'
-
Paint Drying Air Gun
Venturi hand held water based paint drying gun. Working pressure: 4-7 PSI (3-5 bar). Max Pressure: 100 psi (7 bar). Air cosnsumption: 12.3 CFM.
ALG5
-
PCL Multi Purpose PVC Air Hose Reel
Ideal for use with a multitude of applications where a wall or ceiling mounted reel is needed.
ALR1
-
PCL 1/2" Drive Pneumatic Impact Wrench - 540 Nm
General purpose impact wrench with forward and reverse mode.Pin clutch hammer mechanism with 4 forward operation impact settings, non-slip comfort grip.Air Consumption: 300 l/min, Maximum Torque: 540 Nm at 90 PSI, Sound: 96.6 db (A), Vibration: 1.39 m/s², Weight: 2.0 kg.
ALT1
-
PCL 3/8" Drive Pneumatic Ratchet
Forward and reverse knob on the ratchet head.Ball type retainer with easy forward/reverse shift.Maximum Torque 60 Nm at 90 PSI,Air Consumption 115 l/min, Sound 90.0 db (A), Vibration 5.2m/s², Weight 1.2 kg.
ALT2
-
PCL Pneumatic Die Grinder
Ideal for tyre buffing, polishing and grinding.Medium motor with high velocity and low vibration,safety throttle lever with 6 mm collet (3 piece design).Free speed 22,000 RPM, Air Consumption 115 l/min, Sound 93 db (A), Vibration 5.4 m/s², Weight 0.6 kg.
ALT4
-
PCL Pneumatic Orbital Sander
Ergonomic design, built in speed regulator and pad suitable for 150 mm hook and loop sanding discs. Extraction hose and dust bag included. Random orbit for a swirl-free finish. Free speed 1,200 RPM, Air Consumption 120 l/min, Sound 86.8 db (A), Vibration 4.68m/s², Weight 1.455 kg.
ALT5
-
PCL 1/4" Drive 'Mini' Pneumatic Ratchet - 27.5 Nm
"Palm Ratchet allows the operator to reach small areas. Compact and lightweight design allows maximum operator control and performace. Rear exhaust to keep airflow away from work area. High power motor for consistent performance. Maximum Torque 27.5 Nm, Weight 0.3 kg."
ALT6
-
PCL 3/8" Drive 'Mini' Pneumatic Ratchet - 27.5 Nm
Palm Ratchet allows the operator to reach small areas. Compact and lightweight design allows maximum operator control and performance. Rear exhaust to keep airflow away from work area. High power motor for consistent performance. Maximum Torque 27.5 Nm, Weight 0.4 kg.
ALT7
-
PCL 'Mini' Pneumatic Die Grinder
Allows the operator to reach into very small areas. Safety lever prevents any possible accidents. Rear exhaust to keep airflow away from the hand. High power motor designed for all tight grinding situations. 6 mm collet (3 piece design). Free speed 25,000 RPM, Weight 0.34 kg.
ALT8
-
PCL 'Mini' Pneumatic Orbital Sander
Complete with small 50 mm (2") sanding pad allows the operator to reach small areas. Random orbit allows maximum operator control and finish. Rear exhaust to keep airflow away from the hand. High power motor designed for efficient sanding.
ALT9
-
Air Line Assemblies with 1/4 BSP Swivel Nuts
Black rubber tubing with yellow stripe.Working pressure: 20 bar.
ALY28
-
-
AMBERSIL 'Amberklene FE10' Fast Drying Solvent
"A powerful, fast evaporating solvent cleaner and de-greaser. Ideal for removing grease from bearing housings and gear teeth. Removes copper paste from threaded fasteners. Can also be used for stain removal."
AMB100
-
AMBERSIL 'PX24' Industrial Strength Protective Lubricant
Formulated specifically to meet exacting standards of Military maintenance personnel. A multi-purpose lubricant, corrosion inhibitor, dewatering & protective fluid. No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours.
AMB110
-
AMBERSIL 'Dry Moly' Dry Molybdenum Disulphide Lubricant
A resin bonded, high pressure resistant, dry film lubricant containing Molybdenum Disulphide (MoS2) for metal-to-metal lubrication where a wet film cannot be tolerated. Once applied, the MoS2 lubricant prevents seizing, fretting, scuffing & reduces friction.
AMB111
-
AMBERSIL 'Cold Galvanise' Zinc-Rich Protective Coating
A zinc rich acrylic coating that offers excellent Cathodic anti-corrosion protection to steel fabrications and all exposed ferrous metalwork. Suitable as a primer, can be over coated with acrylic, cellulose, alkyd, polyurethane-alkyd & epoxy paints.
AMB120
-
AMBERSIL 'Alu Hi Temp' High Temperature Corrosion Protection
"Corrosion protection for high temperature applications based on aluminium pigments. Builds a glossy, hard film on metal surfaces after exposure to high temperatures (+1 hour at 200°C) and is not eroded over time. For use on ferrous metals subjected to continuous high temperatures."
AMB121
-
AMBERSIL Acrylic Paint Marker Pens 3mm dia. Nib
Tenacious resin binds paint to the writing surface almost eliminating the problems associated with accidental rub-off and will not wash off with water/rain.
AMB130, AMB131, AMB132 ...
-
-
-
-
-
-
NILCO 'Power Fresh' Air Fresheners
'Power Blast' aerosol provides high volume burst of fragrance.For industrial or janitorial applications.Helps eliminates odours in large areas.
AP63
-
-
-
-
-
-
