Search results for 'he1.icu[Fast indexing of any URL on home and inner pages'
-
'Alta Tech 2000' Detergent (TFR) Sprayer
Contains EPDM seals.High temperature resistance.
CAN14, CAN14K
-
-
-
Syphon Pumps
Flexible Hose. Suitable for dispensing light oils and non-aggressive chemicals.
CAN25, CAN60
-
Steel Jerry Can Spout
Manufactured from 0.8 mm steel. Designed to fit snugly onto the 5, 10 and 20 Litre Jerry Cans.
CAN24
-
ALTA '500' Leak-proof Sovlent Sprayer
High-density polythylene (HDPE) body is resistant to most solvents. Stainless steel springs and ball bearings.
CAN26
-
ALTA Foam Pressure Sprayer
Contains FPM VITON® (FKM) seals.Special lance produces a rich foam to help dissolve/degrease dirt.Suitable for use with S.A.S Snow Foam (Part No. SAS2017).
CAN27
-
ALTA Foam Pressure Sprayer
Contains FPM VITON® (FKM) seals.Supplied with 3 x interchangeable nozzles to adjust the foam thickness.
CAN28
-
Hand Operated Oil Suction Pump
Ideal for extracting or changing engine oils or lubricants in plant, vehicles, motorbikes, etc. As well as non lubricants such as water from tanks Supplied with 3 extension tubes.
CAN30
-
Steel Jerry Can
Conforms with UN Certification and UK HSE regulations. Manufactured from 0.8 mm steel. Safety pin included.
CAN305, CAN310, CAN320 ...
-
-
Lever Operated Barrel Pump
Fits 50 to 205 litre drums supplied with a 2" bsp - plus Tri-sure adaptor.
CAN50
-
PRESSOL Industrial Trigger Sprayer - 500 ml
Container: HDPE (high density polyethylene).
CAN55, CAN56
-
-
-
‘CreteBeater’ Heavy Duty Concrete Remover 5L
100% biodegradable and designed to safely remove cement and concrete by dissolving it in a bio-safe way. Does not contain muriatic, phosphoric or citric acids and is therefore, non-corrosive.
CB5
-
Copper Tubing
22 Gauge. BS EN 12449 C106 soft coil. Maximum working pressure: 200 bar / 3,000 PSI
CP11
-
Motor Run Capacitor - Cable Lead Connectors
EN 60252-1 VDE approved. RoHS. Plastic case with 2-core cable lead according to PN-91/E-90103. M8 x 10 mm thread complete with M8 serrated nut.
CPR14M, CPR25M, CPR40M
-
Motor Run Capacitor - Spade Connectors
EN 60252-1 VDE approved. RoHS. Plastic case with 6.3 x 0.8 mm fast-on terminals (6.4 mm spade connectors) to PN-EN6120. M8 x 10 mm thread complete with M8 serrated nut.
CPR14, CPR16, CPR20 ...
-
BAILCAST 'Maxiboot' Universal CV Boot Kit
Complete with 2 x stainless steel clamps, 60g sachet of MoS2 CV grease and instructions.
CVB88
-
BAILCAST 'Uniboot' Stretchy Drive Shaft Boot Kit
Complete with 2 x stainless steel clamps, 60g sachet of MoS2 CV grease and instructions.
CVB96, CVB96B
-
ABRACS Blacksmith Drills
Suitable for steel, cast iron, non ferrous materials.
DAB14, DAB14.5, DAB15 ...
-
ABRACS HSS Co-Cobalt (M35) Drills - Metric
5% cobalt for longer life. Manufactured with a split point allowing the bit to instantly grip the material resulting in higher precision, accuracy and increased drilling speeds.
DAC1, DAC1.5, DAC2 ...
-
-
-
ABRACS HSS Flute Ground Drills - Metric
Manufactured with a split point allowing the bit to instantly grip the material resulting in higher precision, accuracy and increased drilling speeds.
DAG1.5, DAG2, DAG2.5 ...
-
ABRACS HSS Flute Ground Drill Set - Metric
Manufactured with a split point allowing the bit to instantly grip the material resulting in higher precision, accuracy and increased drilling speeds.
DAGK1
-
ABRACS HSS Flute Ground Drill Set - Metric
Manufactured with a split point allowing the bit to instantly grip the material resulting in higher precision, accuracy and increased drilling speeds.
DAGK2
-
ABRACS HSS Roll Forged Drills - Metric
For use on common steel material applications and plastic. 118° tip angle improves heat removal and ensures precise pilot drilling.
DAM1, DAM1.5, DAM2 ...
-
ABRACS HSS Roll Forged Drill Set - Metric
For use on common steel material applications and plastic. 118° tip angle improves heat removal and ensures precise pilot drilling.
DAMK1
