The Workshop Werehouse

21 items

  • KS TOOLS 'Typhon Power' Pneumatic Compact Angle Grinder

    KS TOOLS 'Typhon Power' Pneumatic Compact Angle Grinder

    Air Consumption 113 l/min, Idle RPM: 12,000, Working Pressure: 6.3 bar (90 PSI), Spindle: M10 x 1.0 mm, Length: 400 mm, Sound Power Level: 103dB (A), Sound Pressure Level: 90dB (A), Weight: 1.8 kg.Adjustable spark shield gives you excellent visibility on the part you are working on.

    K515.3075

  • PCL 'Mini' Pneumatic Die Grinder

    PCL 'Mini' Pneumatic Die Grinder

    Allows the operator to reach into very small areas. Safety lever prevents any possible accidents. Rear exhaust to keep airflow away from the hand. High power motor designed for all tight grinding situations. 6 mm collet (3 piece design). Free speed 25,000 RPM, Weight 0.34 kg.

    ALT8

  • PCL 'Mini' Pneumatic Orbital Sander

    PCL 'Mini' Pneumatic Orbital Sander

    Complete with small 50 mm (2") sanding pad allows the operator to reach small areas. Random orbit allows maximum operator control and finish. Rear exhaust to keep airflow away from the hand. High power motor designed for efficient sanding.

    ALT9

  • LASER Air Gun Vacuum/Blower Kit

    LASER Air Gun Vacuum/Blower Kit

    Supplied in a storage box.Complete with nozzles, dust bag, brush and mini hose.Standard 1/4" BSP air inlet. Air pressure: 90 PSI.

    TL7410

  • Spraygun - Conventional

    Spraygun - Conventional

    Gravity feed compliant. Can be used with 3M disposable pot system use adaptor number 2 (3M code 16032). Working pressure: 50 PSI. Maximum pressure: 80 PSI. . Air consumption: Between 7-12 CFM (depending on setup).

    ALG1

  • Spraygun - HVLP

    Spraygun - HVLP

    Gravity feed compliant. Can be used with 3M disposable pot system use adaptor number 2 (3M code 16032). Working pressure: 43-50 PSI. Air consumption: Between 7-10 CFM (depending on setup).

    ALG3

  • Spraygun - Mini HVLP

    Spraygun - Mini HVLP

    Gravity feed compliant. Stainless steel components, suitable for use with water and solvent based paints. Can be used with 3M disposable pot system use adaptor number 21 (3M code 16105). Thread size: M14. Weight: 320g. Working pressure: 43 PSI.

    ALG2

  • Undercoating Gun

    Undercoating Gun

    Under body coating gun. Screws onto a standard tin of underbody coating material and creates a venturi action that sucks up the material and pushes it through the gun nozzle. Complete with plastic extension probe. Operates at 90 PSI (6 bar).

    ALG4

  • Paint Drying Air Gun

    Paint Drying Air Gun

    Venturi hand held water based paint drying gun. Working pressure: 4-7 PSI (3-5 bar). Max Pressure: 100 psi (7 bar). Air cosnsumption: 12.3 CFM.

    ALG5

  • PCL 3/8" Drive 'Mini' Pneumatic Ratchet - 27.5 Nm

    PCL 3/8" Drive 'Mini' Pneumatic Ratchet - 27.5 Nm

    Palm Ratchet allows the operator to reach small areas. Compact and lightweight design allows maximum operator control and performance. Rear exhaust to keep airflow away from work area. High power motor for consistent performance. Maximum Torque 27.5 Nm, Weight 0.4 kg.

    ALT7

  • PCL 1/4" Drive 'Mini' Pneumatic Ratchet - 27.5 Nm

    PCL 1/4" Drive 'Mini' Pneumatic Ratchet - 27.5 Nm

    "Palm Ratchet allows the operator to reach small areas. Compact and lightweight design allows maximum operator control and performace. Rear exhaust to keep airflow away from work area. High power motor for consistent performance. Maximum Torque 27.5 Nm, Weight 0.3 kg."

    ALT6

  • PRESSOL Air Operated Grease Gun

    PRESSOL Air Operated Grease Gun

    Complete with extension pipe and 4-jaw hydraulic connector.Takes 400g cartridge or bulk feed.

    TL920

  • KS TOOLS 1/2" Drive Pneumatic Impact Wrench - 677 Nm

    KS TOOLS 1/2" Drive Pneumatic Impact Wrench - 677 Nm

    Durable 'Pin-Clutch' hammer mechanism.Triple torque pre selection.Right/left reversing switch.Air exhaust through handle.Ultra light housing made from durable two component plastic with non-slip soft grip handle.Air Consumption 128 l/min, Idle RPM: 7,700, Operating Pressure: 6.3 bar (90 PSI), Weight: 2.0 kg.

    K515.1290

  • KS TOOLS 1/2" Drive Pneumatic Compact Impact Wrench - 433 Nm

    KS TOOLS 1/2" Drive Pneumatic Compact Impact Wrench - 433 Nm

    Durable 'Double Hammer' mechanism. Triple torque pre selection.Right/left reversing switch.Air exhaust through handle.Ultra light housing made from durable two component plastic with non-slip soft grip handle.Air Consumption 133 l/min, Idle RPM: 7,700, Operating Pressure: 6.3 bar (90 PSI), Weight: 1.2 kg.

    K515.1275

  • PCL 3/8" Drive Pneumatic Ratchet

    PCL 3/8" Drive Pneumatic Ratchet

    Forward and reverse knob on the ratchet head.Ball type retainer with easy forward/reverse shift.Maximum Torque 60 Nm at 90 PSI,Air Consumption 115 l/min, Sound 90.0 db (A), Vibration 5.2m/s², Weight 1.2 kg.

    ALT2

  • PCL 1/2" Drive Pneumatic Impact Wrench - 540 Nm

    PCL 1/2" Drive Pneumatic Impact Wrench - 540 Nm

    General purpose impact wrench with forward and reverse mode.Pin clutch hammer mechanism with 4 forward operation impact settings, non-slip comfort grip.Air Consumption: 300 l/min, Maximum Torque: 540 Nm at 90 PSI, Sound: 96.6 db (A), Vibration: 1.39 m/s², Weight: 2.0 kg.

    ALT1

  • FUCHS 'Silkair VG22' Air Line Oil

    FUCHS 'Silkair VG22' Air Line Oil

    General purpose.Lubricates pneumatic tools and equipment.Readily separates from water.

    VC191

  • PCL 10 mm (3/8") Pneumatic Reversible Drill

    PCL 10 mm (3/8") Pneumatic Reversible Drill

    Ideal for drilling, reaming and honing. Side mounted forward/reverse shift, fitted with 10 mm (3/8”) keyless chuck. Free speed 1,800 RPM, Air Consumption 130 l/min, Sound 87 db (A), Vibration 1.5 m/s², Weight 1.1 kg.

    ALT3

  • PCL Pneumatic Orbital Sander

    PCL Pneumatic Orbital Sander

    Two handed operation.Insulated handle and motor housing.Includes 150 mm backing pad for 150 mm diameter self-adhesive abrasives.Free speed 1,800 RPM, Air Consumption 130 l/min,Sound 87 db (A), Vibration 1.5 m/s², Weight 1.1 kg.

    ALT5

  • PCL Pneumatic Die Grinder

    PCL Pneumatic Die Grinder

    Ideal for tyre buffing, polishing and grinding.Medium motor with high velocity and low vibration,safety throttle lever with 6 mm collet (3 piece design).Free speed 22,000 RPM, Air Consumption 115 l/min, Sound 93 db (A), Vibration 5.4 m/s², Weight 0.6 kg.

    ALT4

  • Air Regulator/Gauge

    Air Regulator/Gauge

    Length: 32 mm. Weight: 100g. Glass lens unaffected by the solvents. Working pressure range: 7-114 PSI (0.5-7.8 bar).

    ALG10

21 items